Fuel injectors
  1. Home
  2. injection
  3. #1047496190

104749-6190 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047496190 8941698051


104749-6190 INJECTION-PUMP ASSEMBLY
Rating:
58
Buy INJECTION-PUMP ASSEMBLY 104749-6190 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104749-6190 1047496190
ISUZU 8941698051 8941698051

Cross reference number

ZEXEL 104749-6190 1047496190
ISUZU 8941698051 8941698051


Zexel num
Bosch num
Firm num
Name
104749-6190 
 
8941698051  ISUZU
INJECTION-PUMP ASSEMBLY
4EC1T *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105000-2010
Bosch type code   NP-DN12SD12TT
Nozzle holder   105780-2080
Opening pressure MPa   14.7 14.7 15.19
Opening pressure kgf/cm2   150 150 155
Injection pipe
Inside diameter - outside diameter - length (mm) mm   2-6-840
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Pump speed r/min   1000 1000 1000
Boost pressure kPa   42.7 41.4 44
Boost pressure mmHg   320 310 330
Average injection quantity mm3/st.   39.4 38.9 39.9
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Remarks
CBS  
Injection timing adjustment_02
Pump speed r/min   1250 1250 1250
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Average injection quantity mm3/st.   44.4 43.9 44.9
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Remarks
Full  
Injection timing adjustment_03
Pump speed r/min   600 600 600
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   33.7 31.7 35.7
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   1000 1000 1000
Boost pressure kPa   42.7 41.4 44
Boost pressure mmHg   320 310 330
Average injection quantity mm3/st.   39.4 38.4 40.4
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   1250 1250 1250
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Average injection quantity mm3/st.   44.4 43.4 45.4
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_06
Pump speed r/min   1250 1250 1250
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   33.7 31.7 35.7
Oil temperature degC   50 48 52
Injection timing adjustment_07
Pump speed r/min   2250 2250 2250
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Average injection quantity mm3/st.   37 35.4 38.6
Difference in delivery mm3/st.   4.5
Oil temperature degC   52 50 54
Injection timing adjustment_08
Pump speed r/min   2500 2500 2500
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Average injection quantity mm3/st.   35 32 38
Oil temperature degC   55 52 58
Injection quantity adjustment
Pump speed r/min   2800 2800 2800
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Average injection quantity mm3/st.   18 15 21
Difference in delivery mm3/st.   5.5
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_02
Pump speed r/min   2800 2800 2800
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Average injection quantity mm3/st.   18 15 21
Difference in delivery mm3/st.   5.5
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2900 2900 2900
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Average injection quantity mm3/st.   1 0 2
Oil temperature degC   55 52 58
Governor adjustment
Pump speed r/min   375 375 375
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   8 6 10
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   375 375 375
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   8 6 10
Difference in delivery mm3/st.   2
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   40 40
Basic   *
Oil temperature degC   48 46 50
Remarks
Full  
Timer adjustment_02
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   40 40
Oil temperature degC   48 46 50
Speed control lever angle
Pump speed r/min   375 375 375
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position  
0000000901
Pump speed r/min   1250 1250 1250
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Overflow quantity cm3/min   460 330 590
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   2000 2000 2000
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Pressure kPa   579 559 599
Pressure kgf/cm2   5.9 5.7 6.1
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   1250 1250 1250
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Pressure kPa   412 383 441
Pressure kgf/cm2   4.2 3.9 4.5
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   2000 2000 2000
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Pressure kPa   579 559 599
Pressure kgf/cm2   5.9 5.7 6.1
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_04
Pump speed r/min   2250 2250 2250
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Pressure kPa   647 618 676
Pressure kgf/cm2   6.6 6.3 6.9
Oil temperature degC   52 50 54
0000001101
Pump speed r/min   2000 2000 2000
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Timer stroke mm   6 5.8 6.2
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   620 520 720
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Timer stroke mm   0.5 0.5 0.5
Oil temperature degC   50 48 52
_03
Pump speed r/min   1250 1250 1250
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Timer stroke mm   3 2.6 3.4
Oil temperature degC   50 48 52
_04
Pump speed r/min   2000 2000 2000
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Timer stroke mm   6 5.8 6.2
Basic   *
Oil temperature degC   50 48 52
_05
Pump speed r/min   2250 2250 2250
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Timer stroke mm   7 6.7 7.4
Oil temperature degC   52 50 54
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
Pump speed r/min   2000 2000 2000
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Average injection quantity mm3/st.   30 29 31
Timer stroke TA mm   4.9 4.9 4.9
Timer stroke variation dT mm   1.1 0.9 1.3
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   2000 2000 2000
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Average injection quantity mm3/st.   30 29 31
Timer stroke variation dT mm   1.1 0.7 1.5
Basic   *
Oil temperature degC   50 48 52
_03
Pump speed r/min   2000 2000 2000
Boost pressure kPa   69.3 68 70.6
Boost pressure mmHg   520 510 530
Average injection quantity mm3/st.   25 24 26
Timer stroke variation dT mm   1.6 1.2 2
Oil temperature degC   50 48 52
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   1.6 1.5 1.7
BCS stroke mm   4 3.8 4.2
Control lever angle alpha deg.   20 16 24
Control lever angle beta deg.   45 40 50

Test data Ex:

0000001801 W-CSD ADJUSTMENT

Test data 104749-6190
Adjustment of the W-CSD 1. Adjustment of the timer stroke Adjust screw (A) so that the timer stroke is the value determined from the graph. Timer stroke (mm), (1) TA=-0.0235t+1.17 Lever position (deg) (2) theta = -0.0625t+4.85 (-20 <= t <= 20) Theta 2 = -0.12t + 6 (20 deg C <= t <= 50 deg C) Lever position (mm) (3) L1 = -0.02075t+1.585 (-20 <= t <= 20) L2=-0.039t+1.95 (20<=t<=50) (3 shows the gap between the control lever and the idle set screw.) 2. Adjustment of the position of the intermediate lever. Insert a shim L1 between the control lever (I) and the idle set screw (G). Align the intermediate lever (F) with the aligning line (J) and fix screw (E) so that it contacts the control lever. 3. Adjustment of the FICD Insert a shim L2 between the control lever (I) and the idle set screw (G). Use adjusting screw (B) to fix the CSD lever (C) in the position where it operates the intermediate lever via the rod (D). X:Temperature t (deg C) Y1:Timer stroke (mm) Y2:Control lever position (deg) (S) Cold advancer: cooling water temperature: increase direction M:Standard point N:Pump speed (R) Cooling water temperature (O) Timer piston stroke (P) Lever position (deg) (Q) lever position (mm)
----------
L1=0.86+-0.05mm L2=L1+-0.05mm
----------
L1=0.86+-0.05mm N1=500r/min a=20degC b=-20degC c=3.6+-1deg d=6.1+-3deg O1=0.7+-0.4mm O2=1.6+-0.6mm Q1=1.2+-0.3mm Q2=2+-1mm




Have questions with 104749-6190?





Group cross 104749-6190 ZEXEL

Isuzu 

104749-6100  

104749-6220 
 
8941451140 
INJECTION-PUMP ASSEMBLY
4FD1
104749-6110  

104749-6111 
 
 
INJECTION-PUMP ASSEMBLY
4FC1J
104749-6111  
9 460 613 717 
8941769860 
INJECTION-PUMP ASSEMBLY
4FC1J
104749-6120  

104749-6121 
 
8941433320 
INJECTION-PUMP ASSEMBLY
4FC1D
104749-6121  
9 460 615 051 
8944102530 
INJECTION-PUMP ASSEMBLY
4FC1D
104749-6130  
 
8941782600 
INJECTION-PUMP ASSEMBLY
4FC1-J
104749-6140  
 
8941782610 
INJECTION-PUMP ASSEMBLY
4FC1-J
104749-6150  
 
8941782680 
INJECTION-PUMP ASSEMBLY
4FC1-J
104749-6160  
 
8941782700 
INJECTION-PUMP ASSEMBLY
4FC1-J
104749-6170  
 
8941782620 
INJECTION-PUMP ASSEMBLY
4FC1J
104749-6180  
9 460 614 718 
 
INJECTION-PUMP ASSEMBLY
104749-6190  
 
8941698051 
INJECTION-PUMP ASSEMBLY
4EC1T
Back to top