106676-2540 ZEXEL 9 400 617 451 BOSCH INJECTION-PUMP ASSEMBLY 9400617451 1066762540 me440232


106676-2540 INJECTION-PUMP ASSEMBLY
Rating:
10
Buy INJECTION-PUMP ASSEMBLY 106676-2540 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 617 451 9400617451
ZEXEL 106676-2540 1066762540
MITSUBISHI ME440232 me440232

Cross reference number

BOSCH 9 400 617 451 9400617451
ZEXEL 106676-2540 1066762540
MITSUBISHI ME440232 me440232


Zexel num
Bosch num
Firm num
Name
106676-2540 
9 400 617 451 
ME440232  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D24TL K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-4620
Overflow valve opening pressure kPa   255 221 289
Overflow valve opening pressure kgf/cm2   2.6 2.25 2.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4.8 4.75 4.85
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.1
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   107.5 104.5 110.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Boost pressure kPa   28 28
Boost pressure mmHg   210 210
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.8+-0.5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   13 10.4 15.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_03
Adjusting point   D
Rack position   9.3++
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   125 115 135
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   600 600 600
Rack position   R1-1
Boost pressure kPa   4 2.7 5.3
Boost pressure mmHg   30 20 40
Boost compensator adjustment_02
Pump speed r/min   600 600 600
Rack position   R1(10)
Boost pressure kPa   14.7 8 21.4
Boost pressure mmHg   110 60 160
Timer adjustment
Pump speed r/min   0
Advance angle deg.   2.5 2 3
Timer adjustment_02
Pump speed r/min   -
Advance angle deg.   2.5 2 3
Remarks
Measure speed (beginning of operation).
 
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   0 0 0
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 106676-2540
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set idle sub-spring (5)Main spring setting (6)Boost compensator stroke (7)Rack difference between N = N1 and N = N2
----------
K=15 N1=1050r/min N2=600r/min
----------

Speed control lever angle

Test data 106676-2540
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=21deg+-5deg b=8deg+-5deg

Stop lever angle

Test data 106676-2540
N:Pump normal S:Stop the pump. (1)Pump speed aa and rack position bb (to be sealed at delivery) (2)Stopper bolt setting (3)Normal
----------
aa=0r/min bb=1-0.5mm
----------
a=35deg+-5deg b=70deg+-5deg

Timing setting

Test data 106676-2540
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=12deg
----------
a=(6deg)




Have questions with 106676-2540?





Group cross 106676-2540 ZEXEL

Mitsubishi 

9 400 612 572 
ME440033 
INJECTION-PUMP ASSEMBLY
6D24-T
9 400 612 543 
ME440107 
INJECTION-PUMP ASSEMBLY
6D24
9 400 612 045 
 
INJECTION-PUMP ASSEMBLY
6D24TL
9 400 612 278 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 400 613 484 
ME158917 
INJECTION-PUMP ASSEMBLY
6D24TL
9 400 617 450 
ME440231 
INJECTION-PUMP ASSEMBLY
6D24T
106676-2540  
9 400 617 451 
ME440232 
INJECTION-PUMP ASSEMBLY
6D24TL
9 400 612 046 
ME440233 
INJECTION-PUMP ASSEMBLY
6D24TL
9 400 613 271 
ME350752 
INJECTION-PUMP ASSEMBLY
6D24
9 400 612 379 
ME440569 
INJECTION-PUMP ASSEMBLY
6D24T
9 400 617 452 
ME440802 
INJECTION-PUMP ASSEMBLY
6D24TC
9 400 613 210 
ME440948 
INJECTION-PUMP ASSEMBLY
6D24T
Back to top