106671-4330 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066714330 w1n47100a


106671-4330 INJECTION-PUMP ASSEMBLY
Rating:
23
Buy INJECTION-PUMP ASSEMBLY 106671-4330 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106671-4330 1066714330
  W1N47100A

Service parts 106671-4330 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-7160
3. GOVERNOR 105306-1070
4. SUPPLY PUMP 105237-1480
5. AUTOM. ADVANCE MECHANIS 105635-0150
6. COUPLING PLATE 105663-0340
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE
15. NOZZLE SET

Include in #1:

106671-4330 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106671-4330 1066714330
  W1N47100A


Zexel num
Bosch num
Firm num
Name
106671-4330 
106671-4331 
 
W1N47100A   
INJECTION-PUMP ASSEMBLY
DMF13HS * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   132425-0120
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.05 3 3.1
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.6
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   185.5 180.5 190.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.4+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   54.5 51.5 57.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Timer adjustment
Pump speed r/min   350
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   600
Advance angle deg.   1.6 1.1 2.1
Timer adjustment_03
Pump speed r/min   800
Advance angle deg.   5 4.5 5.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106671-4330
N:Pump speed R:Rack position (mm) (1)Rack limit using the stop lever: R1 (2)Damper spring setting: DL
----------
R1=12.6+0.2mm DL=6.9-0.3mm
----------

0000000901

Test data 106671-4330
F:Full load I:Idle (1)Stopper bolt setting
----------

----------
a=13deg+-5deg b=18deg+-3deg

Stop lever angle

Test data 106671-4330
N:Pump normal S:Stop the pump.
----------

----------
a=4deg+-5deg b=38deg+-5deg

Timing setting

Test data 106671-4330
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(6deg)




Have questions with 106671-4330?





Group cross 106671-4330 ZEXEL

106671-4330  

106671-4331 
 
W1N47100A 
INJECTION-PUMP ASSEMBLY
DMF13HS

Niigata-Urawa 

 
W1N47100B 
INJECTION-PUMP ASSEMBLY
DMF13HS
 
W1N47100C 
INJECTION-PUMP ASSEMBLY
DMF13HS
 
W1N47100E 
INJECTION-PUMP ASSEMBLY
DMF13HS
 
W1N47100F 
INJECTION-PUMP ASSEMBLY
DMF13HS
9 400 616 802 
W1N47100G 
INJECTION-PUMP ASSEMBLY
DMF13HS
Back to top