106671-2154 ZEXEL 9 400 619 765 BOSCH INJECTION-PUMP ASSEMBLY 9400619765 1066712154 3626510112


106671-2154 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 106671-2154 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 619 765 9400619765
ZEXEL 106671-2154 1066712154
MITSUBISHI-HEAV 3626510112 3626510112

Service parts 106671-2154 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-5083
3. GOVERNOR 105407-2752
4. SUPPLY PUMP 105217-1331
5. AUTOM. ADVANCE MECHANIS 105636-1920
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5171
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-4441
14. NOZZLE 105015-4350
15. NOZZLE SET

Include in #1:

106671-2154 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 619 765 9400619765
ZEXEL 106671-2154 1066712154
MITSUBISHI-HEAV 3626510112 3626510112


Zexel num
Bosch num
Firm num
Name
106671-2154 
106671-2155 
9 400 619 765 
3626510112  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6B * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8130
Bosch type code   EFEP215A
Nozzle   105780-0050
Bosch type code   DN6TD119NP1T
Nozzle holder   105780-2090
Bosch type code   EFEP215
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   8-3-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.7 3.65 3.75
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.5
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   269.5 262.5 276.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.4+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   29.5 26.5 32.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   -
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   240 240 250
Fixing the lever   *
Timer adjustment
Pump speed r/min   450--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   400
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   500
Advance angle deg.   0.9
Timer adjustment_04
Pump speed r/min   700
Advance angle deg.   1.2 0.7 1.7
Timer adjustment_05
Pump speed r/min   850
Advance angle deg.   2 1.5 2.5
Timer adjustment_06
Pump speed r/min   1150
Advance angle deg.   4 3.5 4.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 106671-2154
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
K=16
----------

Speed control lever angle

Test data 106671-2154
F:Full speed I:Idle S:Stop
----------

----------
a=20deg+-5deg b=32deg+-3deg c=40deg+-5deg

Stop lever angle

Test data 106671-2154
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=19deg+-5deg b=53deg+-5deg

Timing setting

Test data 106671-2154
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(100deg)




Have questions with 106671-2154?





Group cross 106671-2154 ZEXEL

Mitsubishi-Heav 

9 400 616 742 
3626107190 
INJECTION-PUMP ASSEMBLY
S6B
9 400 616 742 
3626107190 
INJECTION-PUMP ASSEMBLY
S6B

Mitsubishi-Heav 

 
3626107160 
INJECTION-PUMP ASSEMBLY
S6B
 
3626510110 
INJECTION-PUMP ASSEMBLY
S6B
 
3626510111 
INJECTION-PUMP ASSEMBLY
S6B
106671-2154  

106671-2155 
9 400 619 765 
3626510112 
INJECTION-PUMP ASSEMBLY
S6B
9 400 619 436 
3626520110 
INJECTION-PUMP ASSEMBLY
S6B
 
3626530110 
INJECTION-PUMP ASSEMBLY
S6B
9 400 616 743 
3626540110 
INJECTION-PUMP ASSEMBLY
S6B
Back to top