Rating:
Information injection-pump assembly
BOSCH
9 400 612 211
9400612211
ZEXEL
101609-9150
1016099150
MITSUBISHI-HEAV
3436115070
3436115070
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Fuel Injection Pump 101609-9150 1016099150, Compatible For S6K 3066 Engine 320C Excavator
FOBKXSXM The design considers the convenience of maintenance, easy disassembly and replacement of parts, and facilitates fault diagnosis and maintenance || Having a large flow output capability, it can provide sufficient fuel for the engine in a short period of time to meet its high load operation needs || It can adjust the flow rate of fuel. Reduce flow to save fuel at low loads || Capable of withstanding adverse factors such as vibration, impact, and high temperature, ensuring continuous supply of fuel to the engine || Fuel Injection Pump 101609-9150 1016099150, Compatible For S6K 3066 Engine 320C Excavator
FOBKXSXM The design considers the convenience of maintenance, easy disassembly and replacement of parts, and facilitates fault diagnosis and maintenance || Having a large flow output capability, it can provide sufficient fuel for the engine in a short period of time to meet its high load operation needs || It can adjust the flow rate of fuel. Reduce flow to save fuel at low loads || Capable of withstanding adverse factors such as vibration, impact, and high temperature, ensuring continuous supply of fuel to the engine || Fuel Injection Pump 101609-9150 1016099150, Compatible For S6K 3066 Engine 320C Excavator
320C Fuel Injection Pump 101609-9150, Compatible for Mitsubishi S6K CAT 3066 Engine 320C E320C Excavator Engine Spare Parts
FOBKXSXM The design considers the convenience of maintenance, easy disassembly and replacement of parts, and facilitates fault diagnosis and maintenance || Having a large flow output capability, it can provide sufficient fuel for the engine in a short period of time to meet its high load operation needs || It can adjust the flow rate of fuel. Reduce flow to save fuel at low loads || Capable of withstanding adverse factors such as vibration, impact, and high temperature, ensuring continuous supply of fuel to the engine || 320C Fuel Injection Pump 101609-9150, Compatible For Mitsubishi S6K CAT 3066 Engine 320C E320C Excavator Engine Spare Parts
FOBKXSXM The design considers the convenience of maintenance, easy disassembly and replacement of parts, and facilitates fault diagnosis and maintenance || Having a large flow output capability, it can provide sufficient fuel for the engine in a short period of time to meet its high load operation needs || It can adjust the flow rate of fuel. Reduce flow to save fuel at low loads || Capable of withstanding adverse factors such as vibration, impact, and high temperature, ensuring continuous supply of fuel to the engine || 320C Fuel Injection Pump 101609-9150, Compatible For Mitsubishi S6K CAT 3066 Engine 320C E320C Excavator Engine Spare Parts
Service parts 101609-9150 INJECTION-PUMP ASSEMBLY:
1.
_
5.
AUTOM. ADVANCE MECHANIS
6.
COUPLING PLATE
7.
COUPLING PLATE
8.
_
9.
_
11.
Nozzle and Holder
12.
Open Pre:MPa(Kqf/cm2)
21.6{220}
15.
NOZZLE SET
Include in #1:
101609-9150
as INJECTION-PUMP ASSEMBLY
Include in #2:
104264-4021
as _
Cross reference number
BOSCH
9 400 612 211
9400612211
ZEXEL
101609-9150
1016099150
MITSUBISHI-HEAV
3436115070
3436115070
Zexel num
Bosch num
Firm num
Name
101609-9150
9 400 612 211
3436115070 MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6K-T K 14BF INJECTION PUMP ASSY PE6AD PE
S6K-T K 14BF INJECTION PUMP ASSY PE6AD PE
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113 or {SAEJ967d}
1404 Test oil ISO4113 or {SAEJ967d}
Test oil temperature
degC
40
40
45
Nozzle and nozzle holder
105780-8140
Bosch type code
EF8511/9A
Nozzle
105780-0000
Bosch type code
DN12SD12T
Nozzle holder
105780-2080
Bosch type code
EF8511/9
Opening pressure
MPa
17.2
Opening pressure
kgf/cm2
175
Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600
Outer diameter - inner diameter - length (mm) mm 6-2-600
Overflow valve
131424-5720
Overflow valve opening pressure
kPa
255
221
289
Overflow valve opening pressure
kgf/cm2
2.6
2.25
2.95
Tester oil delivery pressure
kPa
255
255
255
Tester oil delivery pressure
kgf/cm2
2.6
2.6
2.6
Direction of rotation (viewed from drive side)
Right R
Right R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right R
Right R
Injection order
1-5-3-6-
2-4
Pre-stroke
mm
3.2
3.15
3.25
Beginning of injection position
Drive side NO.1
Drive side NO.1
Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5
Cal 1-5 deg. 60 59.5 60.5
Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5
Cal 1-3 deg. 120 119.5 120.5
Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5
Cal 1-6 deg. 180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5
Cyl.1-2 deg. 240 239.5 240.5
Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5
Cal 1-4 deg. 300 299.5 300.5
Injection quantity adjustment
Adjusting point
A
Rack position
9.8
Pump speed
r/min
900
900
900
Average injection quantity
mm3/st.
108.5
107.5
109.5
Max. variation between cylinders
%
0
-2.5
2.5
Basic
*
Fixing the lever
*
Injection quantity adjustment_02
Adjusting point
C
Rack position
6.2+-0.5
Pump speed
r/min
450
450
450
Average injection quantity
mm3/st.
11
9.7
12.3
Max. variation between cylinders
%
0
-14
14
Fixing the rack
*
Injection quantity adjustment_03
Adjusting point
D
Rack position
10++
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
100
100
105
Fixing the lever
*
Rack limit
*
Test data Ex:
Governor adjustment
N:Pump speed
R:Rack position (mm)
(1)Target notch: K
(2)Tolerance for racks not indicated: +-0.05mm.
(3)RACK LIMIT
(4)Set idle sub-spring
(5)Main spring setting
(6)Rack difference between N = N1 and N = N2
----------
K=10 N1=900r/min N2=400r/min
----------
----------
K=10 N1=900r/min N2=400r/min
----------
Speed control lever angle
F:Full speed
I:Idle
S:Stop
(1)Stopper bolt setting
----------
----------
a=31deg+-3deg b=13deg+-5deg c=3deg+-5deg
----------
----------
a=31deg+-3deg b=13deg+-5deg c=3deg+-5deg
Stop lever angle
N:Pump normal
S:Stop the pump.
(1)Rack position = aa, speed = bb.
(2)Normal
----------
aa=1-0.5mm bb=0r/min
----------
a=21deg+-5deg b=(55deg)
----------
aa=1-0.5mm bb=0r/min
----------
a=21deg+-5deg b=(55deg)
Timing setting
(1)Pump vertical direction
(2)Position of camshaft's key groove at No 1 cylinder's beginning of injection
(3)-
(4)-
----------
----------
a=(50deg)
----------
----------
a=(50deg)
Have questions with 101609-9150?
Group cross 101609-9150 ZEXEL
Dpico
Mitsubishi-Heav
Dpico
Mitsubishi-Heav
101609-9150
9 400 612 211
3436115070
INJECTION-PUMP ASSEMBLY
S6K-T
S6K-T