101601-3170 ZEXEL 9 400 610 197 BOSCH INJECTION-PUMP ASSEMBLY 9400610197 1016013170 6138721110


101601-3170 INJECTION-PUMP ASSEMBLY
Rating:
67
Buy INJECTION-PUMP ASSEMBLY 101601-3170 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 197 9400610197
ZEXEL 101601-3170 1016013170
KOMATSU 6138721110 6138721110

Service parts 101601-3170 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-2700
3. GOVERNOR 105411-0950
4. SUPPLY PUMP 105210-4690
5. AUTOM. ADVANCE MECHANIS 105614-3070
6. COUPLING PLATE 105662-0810
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-6180
11. Nozzle and Holder 6138-12-3300
12. Open Pre:MPa(Kqf/cm2) 24.5{250}
13. NOZZLE-HOLDER 105031-4480
14. NOZZLE 105015-5810
15. NOZZLE SET

Include in #1:

101601-3170 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 197 9400610197
ZEXEL 101601-3170 1016013170
KOMATSU 6138721110 6138721110


Zexel num
Bosch num
Firm num
Name
101601-3170 
101601-3440 
9 400 610 197 
6138721110  KOMATSU
INJECTION-PUMP ASSEMBLY
SA6D110 K 14BF INJECTION PUMP ASSY PE6AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   4 3.95 4.05
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.5
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   85.8 84.8 86.8
Max. variation between cylinders %   0 -2 2
Basic   *
Fixing the lever   *
Boost pressure kPa   40 40
Boost pressure mmHg   300 300
Injection quantity adjustment_02
Adjusting point   B
Rack position   7.4+-0.5
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   15.5 14.3 16.7
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Boost compensator adjustment
Pump speed r/min   600 600 600
Rack position   10..5
Boost pressure kPa   10.7 8 13.4
Boost pressure mmHg   80 60 100
Boost compensator adjustment_02
Pump speed r/min   600 600 600
Rack position   11.5
Boost pressure kPa   26.7 26.7 26.7
Boost pressure mmHg   200 200 200
Timer adjustment
Pump speed r/min   750--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   700
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   900
Advance angle deg.   1.4 0.9 1.9
Timer adjustment_04
Pump speed r/min   1100
Advance angle deg.   2.8 2.3 3.3
Timer adjustment_05
Pump speed r/min   -
Advance angle deg.   5 4.5 5.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101601-3170
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Boost compensator stroke (3)Rack difference between N = N1 and N = N2 (4)Rack difference between N = N3 and N = N4
----------
K=16 N1=1100r/min N2=750r/min N3=1100r/min N4=400r/min
----------

Speed control lever angle

Test data 101601-3170
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=8deg+-5deg b=23deg+-5deg

Stop lever angle

Test data 101601-3170
N:Pump normal S:Stop the pump. (1)At shipping (2)Set the stopper bolt at speed = aa and rack position = bb (seal for delivery after setting the stopper bolt).
----------
aa=0r/min bb=1-0.2mm
----------
a=21deg+-5deg b=(52deg)

Timing setting

Test data 101601-3170
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(0deg)




Have questions with 101601-3170?





Group cross 101601-3170 ZEXEL

Komatsu 

9 400 610 243 
6138721600 
INJECTION-PUMP ASSEMBLY
SA6D110
 
6138721550 
INJECTION-PUMP ASSEMBLY
SA6D110
9 400 614 579 
6138721510 
INJECTION-PUMP ASSEMBLY
SA6D110
9 400 610 563 
6138721950 
INJECTION-PUMP ASSEMBLY
SA6D110
 
6138721690 
INJECTION-PUMP ASSEMBLY
SA6D110
 
 
INJECTION-PUMP ASSEMBLY
S6D110
9 400 610 305 
6138721150 
INJECTION-PUMP ASSEMBLY
S6D110
 
6138711280 
INJECTION-PUMP ASSEMBLY
SA6D110
101601-3170  

101601-3440 
9 400 610 197 
6138721110 
INJECTION-PUMP ASSEMBLY
SA6D110
 
6138721520 
INJECTION-PUMP ASSEMBLY
SSA6D110
 
6138721560 
INJECTION-PUMP ASSEMBLY
S6D110
Back to top