Fuel injectors
  1. Home
  2. f
  3. #1066622150

106662-2150 ZEXEL Calibration Data 1066622150 0429050502


106662-2150 None
Rating:
15
Buy None 106662-2150 zexel genuine, new aftermarket engine parts with delivery

Information

ZEXEL 106662-2150 1066622150
MITSUBISHI-HEAV 0429050502 0429050502

Cross reference number

ZEXEL 106662-2150 1066622150
MITSUBISHI-HEAV 0429050502 0429050502


Zexel num Bosch num Firm num Firm Name
106662-2150    0429050502  MITSUBISHI-HEAV
12DH *

Calibration Data:



Adjustment conditions Test oil   ISO4113 or {SAEJ967d}
1404 Test oil
Test oil temperature degC   40 40 45
Nozzle   105780-0020
Bosch type code   DN4SD24T
Nozzle holder   105031-2010
Bosch type code   KB56SD273
Opening pressure MPa   11.8
Opening pressure kgf/cm2   120
Injection pipe mm   6-2-600
Outer diameter - inner diameter - length (mm)
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)   L
Left


Injection timing adjustment Direction of rotation (viewed from drive side)   L
Left
Injection order   6-2-4-1- 5-3
Pre-stroke mm   2.05 2 2.1
Beginning of injection position   NO.1
Drive side
Difference between angles 1 deg.   60 59.5 60.5
Cal 6-2
Difference between angles 2 deg.   120 119.5 120.5
Cal 6-4
Difference between angles 3 deg.   180 179.5 180.5
Cal 6-1
Difference between angles 4 deg.   240 239.5 240.5
Cal 6-5
Difference between angles 5 deg.   300 299.5 300.5
Cal 6-3


Injection quantity adjustment Adjusting point   A
Rack position   17
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   280 272 288
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the rack   *
Remarks  
Standard point A's rack position same as 106664-2010 in row A


Injection quantity adjustment_02 Adjusting point   C
Rack position   7+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   35 31.5 38.5
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:



Governor adjustment

Test data 106662-2150 N:Pump speed R:Rack position (mm) (1)Idle sub spring setting: L1.
----------
L1=7-0.5mm
----------



Speed control lever angle

Test data 106662-2150 M:Maximum speed S:Stop
----------

----------
a=(35deg) b=32deg+-3deg




Have questions with 106662-2150?





Group cross 106662-2150 ZEXEL

Mitsubishi-Heav 

106662-2110 
106662-2240    0429050170 
6DH
106662-2120 
106662-2121    0429050551  INJECTION-PUMP ASSEMBLY
12DH
106662-2121    0429050552  INJECTION-PUMP ASSEMBLY
12DH
106662-2131  9 400 616 634  0429050582  INJECTION-PUMP ASSEMBLY
12DH
106662-2141    0429050522  INJECTION-PUMP ASSEMBLY
12DH
106662-2150    0429050502 
12DH
106662-2181  9 400 616 635  0429050181  INJECTION-PUMP ASSEMBLY
6DH
106662-2191  9 400 616 636  0429050151  INJECTION-PUMP ASSEMBLY
6DH
Back to top